IDEXX SDMA testing

How to use IDEXX SDMA tests

How to run the Catalyst SDMA Test

How to run SDMA on a Catalyst One Chemistry Analyser
 
  1. Enter the sample information on the IDEXX VetLab Station.
  2. Load the slides and sample in the sample drawer.
  3. Close the sample drawer and press the Start button on the analyser.
How to run SDMA on a Catalyst Dx Chemistry Analyser
 

1. Enter the sample information on the IDEXX VetLab Station.
2. Select the patient and sample type on your Catalyst Dx Chemistry Analyser.
3. Load your sample, chemistry CLIP, and SDMA slide.
4. Load the reagent and tap Run on the analyser.

Answers to common questions about the Catalyst SDMA Test

Running and analysing the Catalyst SDMA Test is simple. Use these resources to answer your questions about the Catalyst SDMA Test.

Store the Catalyst SDMA Test in the refrigerator. There’s no need to warm the Catalyst SDMA Test. Just pull it from the refrigerator when you’re ready to run it.

The Catalyst SDMA Test and reagent can be stored in their pouch at room temperature for up to 8 hours. After 8 hours, store any unused materials in the refrigerator (do not freeze).

Absolutely. If you have a Catalyst One Chemistry Analyser, the Catalyst SDMA Test can be run alone or with other slides as part of a comprehensive patient profile. For example, you could run a Catalyst Lyte 4 CLIP, a Catalyst Chem 17 CLIP, a Catalyst Total T4 Test, and a Catalyst SDMA Test with one patient sample.

If you have a Catalyst Dx Chemistry Analyser, the only slides you can’t run the Catalyst SDMA Test with are phenobarbital, total T4, and CRP.

You can load the slides in any order when running SDMA on the Catalyst One Chemistry Analyser or with 18 or fewer slides on the Catalyst Dx Chemistry Analyser.

If you’re running more than more than 18 slides on the Catalyst Dx Chemistry Analyser, include the Catalyst SDMA Test with the first 18. If you’re running electrolytes, load those slides first.

The recommended sample volume to run the Catalyst SDMA Test depends on the type of sample you're using. For whole blood, we recommend 600–800 µL. If you're testing serum/plasma, we recommend 65 µL, or 300 µL to run SDMA with other tests.

Get quick answers on what to do when SDMA is increased here.

Still have questions about how to run the Catalyst SDMA Test?

Download: SDMA Quick Reference Guide  |  Read: SDMA FAQs

SDMA testing from IDEXX Reference Laboratories

IDEXX Reference Laboratories includes the IDEXX SDMA Test in all routine chemistry panels. There’s no additional cost and the turnaround time is the same.

SDMA is increased. Now what?

Use the IDEXX SDMA Test Algorithm to take the appropriate steps towards confirming disease and diagnosis.
 

Interpret your results

Two options: same reliable results

The in-house Catalyst SDMA Test for use with the Catalyst One and Catalyst Dx chemistry analyzers
The IDEXX SDMA Test, included with every chemistry panel or as a stand-alone test from IDEXX Reference Laboratories